| Suitable for pendant lights | Yes |
| Integrated emergency power supply | No |
| Device | LED driver constant current |
| Exchangeable control unit | No |
| Equipment supplied | Yes |
| With sensor of light | No |
| Energy class | D |
| Start of phase break | No |
| End of phase break | No |
| Rated current | 100.0...150.0 mA |
| Nominal current of the LED at constant current | --- mA |
| Rated life L70/B50 at 25°C | 100000.0 h |
| Rated life L80/B50 at 25°C | 50000 h |
| Luminaire efficiency | 140 lm/W |
| Light distribution element | Diffuser |
| Light emission | Direct |
| Glare assessment (UGR) | 19.0 |
| Power factor (cos phi) | 0.9 |
| Effective luminous flux | 4300 lm |
| Photobiological risk group according to EN 62471 | GR0 |
| Protection class (IP) | IP20 |
| Protection class against impacts (IK) | IK03 |
| Wall mounting | No |
| Number of lamps/modules | 1 |
| Number of poles | 5 |
| Max. number of luminaires per circuit breaker B16 | 30.0 |
| Max. number of luminaires per circuit breaker C16 | 50.0 |
| Fire protection "D" | No |
| Accepted lamp power | --- W |
| System power | 31.0 W |
| Lumen adjustment | Levels |
| Light distribution | Symmetrical |
| Wire surface | 0.75 mm² |
| Light source included | Yes |
| Light source included | Yes |
| Harmonic distortion rate | 20 |
| Nominal room temperature according to IEC 62722-2-1 | 25.0 °C |
| Color temperature | 4000 K |
| Glow-wire test according to IEC 60695-2-11 | 650 °C - 30 s |
| Type | LED not interchangeable |
| Type of wiring | Suitable for through-wiring |
| Color uniformity (mcAdam ellipse) | SDCM3 |
| DALI variation-2 | Yes |
