| Suitable for pendant lights | No |
| Integrated emergency power supply | No |
| Device | LED driver constant current |
| Exchangeable control unit | No |
| Equipment supplied | Yes |
| With sensor of light | No |
| Energy efficiency class of the supplied lamp | A++, A+, A (LED) |
| Energy class | E |
| Start of phase break | Yes |
| End of phase break | Yes |
| Rated current | 42.000-45.000 mA |
| Integrated diameter | 160 mm |
| Luminous efficacy of the lamp | 74 lm/W |
| Luminaire efficiency | 74 lm/W |
| Light emission | Direct |
| Glare assessment (UGR) | 25.500 |
| Power factor (cos phi) | 0.990 |
| Luminous flux (Lumen) | 740 lm |
| Effective luminous flux | 740 lm |
| Photobiological risk group according to EN 62471 | GR1 |
| Protection class (IP) | IP65 |
| Protection class against impacts (IK) | IK07 |
| Wall mounting | No |
| Number of lamps/modules | 1.000 |
| Number of poles | 3 |
| Max. number of luminaires per circuit breaker B16 | 100.000 |
| Max. number of luminaires per circuit breaker C16 | 100.000 |
| Fire protection "D" | No |
| Accepted lamp power | 10 W |
| System power | 10.000 W |
| Regulability | Not adjustable |
| Light distribution | Symmetrical |
| Connectable conductor section | 1 mm² |
| Light source included | Yes |
| Light source included | Yes |
| Brushed surface | No |
| Nominal room temperature according to IEC 62722-2-1 | -40 °C |
| Color temperature | 3000 K |
| Glow-wire test according to IEC 60695-2-11 | 650 °C - 30 s |
| Type | LED not interchangeable |
| Type of wiring | Termination |
| Color uniformity (mcAdam ellipse) | SDCM3 |
| Variation according to the order | Yes |