| Suitable for pendant lights | No |
| Integrated emergency power supply | No |
| Device | LED driver constant current |
| Exchangeable control unit | Yes |
| Equipment supplied | Yes |
| With sensor of light | No |
| Energy efficiency class of the supplied lamp | A++, A+, A (LED) |
| Energy class | E |
| Start of phase break | No |
| End of phase break | No |
| Rated current | 146.000-159.000 mA |
| Rated life L80/B50 at 25°C | 50000 h |
| Luminaire efficiency | 99 lm/W |
| Light emission | Direct |
| Recessed in insulated ceiling, fire protection "F with roof". | Yes |
| Glare assessment (UGR) | 18.000 |
| Low glare | Yes |
| Effective luminous flux | 3450 lm |
| Photobiological risk group according to EN 62471 | GR0 |
| Protection class (IP) | IP40 |
| Protection class against impacts (IK) | IK03 |
| Wall mounting | No |
| Number of lamps/modules | 1.000 |
| Number of poles | 2 |
| Max. number of luminaires per circuit breaker B16 | 12.000 |
| Max. number of luminaires per circuit breaker C16 | 20.000 |
| Fire protection "D" | No |
| Accepted lamp power | 35 W |
| System power | 35.000 W |
| Light distribution | Symmetrical |
| Wire surface | 1.500 mm² |
| Light source included | Yes |
| Light source included | Yes |
| Harmonic distortion rate | 0.25 |
| Nominal room temperature according to IEC 62722-2-1 | -20 °C |
| Color temperature | 4000 K |
| Glow-wire test according to IEC 60695-2-11 | 650 °C - 30 s |
| Type | LED not interchangeable |
| Type of wiring | Termination |
| Type of connection | Automatic bollard |
| Type of connection | File terminal |
| Color uniformity (mcAdam ellipse) | SDCM3 |
